Technical Information, Flexvat FEP And Gasket Information, Vat mounting Information
LittleRP/Small Vat Technical Information:
LittleRP Compatible Vat, Window And Mounting Hole Pattern (dxf)
If you have access to a laser cutter/engraver you can cut your own replacement FEP windows and gaskets using the following information.
40w laser: 45mm/sec with air. A 9" x 12" sheet of FEP will yield 4 Windows. 1 window is needed when assembling this vat.
LittleRP/Small Vat Gasket Pattern (dxf):
40w laser: 45mm/sec with air. A 9" x 12" sheet of craft foam (1/2 sheet) will yield 4 gaskets. 1 gasket is needed when assembling this vat.
Mid Sized Vat Technical Information:
Mid Sized Vat Window And Mounting Hole Pattern (dxf)
If you have access to a laser cutter/engraver you can cut your own replacement FEP windows and gaskets using the following information.
40w laser: 45mm/sec with air. A 9" x 12" sheet of FEP will yield 2 Windows.
Mid Sized Vat Gasket Pattern (dxf):
40w laser: 45mm/sec with air. A 9" x 12" sheet of 2mm thick craft foam (1/2 sheet) will yield 2 gaskets. 2 gaskets are needed when assembling this vat.